4
• Enter the Program Mode by holding down the "P" key for 3 seconds
• Press the "P" key to move the top display from one parameter to the next
• Press the "E" key to scroll the bottom display through the available choices for that parameter
• While in Program Mode, the unit will halt operation. Changes will only become effective after re
turning to Control Mode by holding down the "P" key for 3 seconds
For 3 Seconds
P
P
Output 2 Operation:
Determines the functionality of the 2nd output. Choices are:
• Interval (
int
): Output 2 parallels the operation of Output 1.
• Batch Count (
bC
): Output 2 will be activated after a preset amount of Cycles is
completed. The preset value is input in the Batch Count screen in Control Mode.
P
Note: The following parameter will not appear if "Standard" is chosen as the Operating
Function. In that instance, Output 2 will default to "Batch Count".
Batch Function:
Determines how the time cycle will be affected when the Batch Count Preset is
reached. Choices are:
• Stop (
StoP
): The timing cycle will halt after the number of cycles set for the Batch Count
is completed. To activate another cycle, it is necessary to reset the unit and provide a
start signal.
• Continue (
Cont
): The timing cycle will continue until a reset signal is received.
Note: The following parameter will not appear if "Percentage" and "Interval" are
chosen for the first two settings.
P
Note: The following parameter will not appear if "Percentage" and "Interval" are
chosen for the first two settings.
Batch Count Output:
Sets the duration of Output 2, within a range from 1 second to 9999 seconds.
A setting of 0000 will latch the output until a reset signal is received.
C O N F I G U R A T I O N
Operating Function:
Determines how the time periods for the repeat cycle will be set. Choices are:
• Percentage (
PErC
): Preset one is input as a percentage of the total time base which is
set in Preset 2.
• Standard (
Std
): Preset one represents the amount of time that output 1 will be "On"
during the cycle. Output 2 represents the "Off" time in the cycle. The time range for
each output is independently settable.
P E r C
F u n c
o u t 2
1 n t
b F n C
S t o P
b c t
0 0 0 0
PROGRAM MODE
