SET UP & OPERATION
Air Filtering and Dry Vacuuming
1. Attach the Idro device
to the tank inlet deflector
located at the inside of the tank.
2. Fill with water up to the
bumper (1-1/2 gallons).
3. Insert purifier into tank.
4. Ensure cartridge filter “L” is
secured to the vacuum head by
the filter bracket “Z”. Turn
clockwise to secure, counter-
clockwise to remove.
7. Attach appropriate
accessory. For power head
assembly, see power head wand
assembly on page 8. For double
use brush, see Extraction Wand
Assembly to change from carpet
tool to double use brush
attachment on page 9 and 10.
6. Attach hose into inlet.
8.Activate the vacuum by pressing the red switch
on vacuum head.
9.Turn the vacuum speed knob located on top of
the vacuum head to:
-Air Filtering for air filtration use.
-Vac Cleaning for vacuuming use.
5. Place vacuum head C onto
the tank and lock into place with
the 2 clamps.
Page 5
Fill line
