Eagle power FASTRACTS SC12, Operation And Parts Manual

Page: 3 / 18

BEFORE OPERATING THE MACHINE
Read the manual carefully and completely before attempting to operate the unit. This manual has
important information for the use and safe operation of the machine. Keep this manual handy at all
times. This machine will ensure years of satisfactory service if operated and maintained according to
recommendations in the manual. If additional information is needed, please contact your local
distributor or write to:
EAGLE POWER PRODUCTS
1174 Northland Drive
Mendota Heights, MN 55120
All information and specifications printed in the manual and parts list are current at the time of
printing; however, because of Eagle Power’s policy of continual product improvement, we reserve
the right to make changes at any time without notice.
This machine is shipped with antifreeze in the solution line system to protect the pump and valves
from freezing during transport and storage. Before you use the unit, rinse the solution line system
with clean water (See Preparing The Machine).
WARNING
•
The machine was designed for use on carpet and upholstery extraction applications as per
instructions and recommendations written in this manual. Any deviation from its proper use or
purpose and the consequential damage that may occur is the sole responsibility of the end
user.
•
Disconnect the power cord from outlet before servicing. Do not leave machine connected to
an electrical outlet when unattended.
•
Do not immerse or use this machine in standing water. Such use may cause electric shock.
•
This equipment is not designed to handle or use combustible/volatile substance such as
gasoline or kerosene, in, on, or near the machine. The use of such materials will cause an
extreme hazard condition.
•
When using an extension cord, use only a 3 conductor grounding cord-12 ga. wire or heavier.
•
To avoid electric shock, do not expose the unit to rain-store it indoors only.
•
Do not use the machine for dry vacuuming. This machine is not outfitted with a fine dust filter
and it will damage the vacuum motor(s).