SET UP THE CANOPY
2
3
4
5
1
OPEN THE CANOPY FRAME
ATTACH THE CANOPY TOP
LOCK THE FRAME
ADJUST THE CANOPY
HEIGHT
ATTACH THE SIDEWALL
SECURING THE CANOPY IN PLACE
●
Lift and partially pull the canopy frame apart.
●
Unfold the canopy top and
place on top of the canopy frame.
●
Secure the canopy top to the
corners of the canopy frame
using the velcro connections.
●
On each corner, engage the slider
by lifting up the slider while holding
down on the top of the leg. The slider
will automatically lock when it
reaches the hole in the upper leg.
●
Press the push pin on each
leg and raise or lower to adjust
the canopy height.
●
Hang clothes or bag on hook
on the eave when changing.
Click
●
Insert a stake into the footpad of each leg.
●
Attach the sidewall to the eave and leg using the Velcro.
●
Tie four ropes to the corners of the canopy top. Measure out from the
each leg to a proper distance and secure four stakes to the ground. Tie
the ropes to the stakes in the ground. Ensure the ropes have the
proper tension by adjusting the
plastic adjusters on the ropes.
●
Put clothes into two mesh bag on
both sides of sidewall when changing.
●
Fill the sewn pockets at the bottom
corners of the sidewalls with sand
or a weighted object to secure the
changing room.
Sand pocket at
each corner
Mesh bag
Hook
