For Mobile Units, install undershelf and casters.
If your unit is a Stationary Unit, go back to page 5.
Electric Hot Food Table with Sealed-in Wells (SHT Series)
ASSEMBLY INSTRUCTIONS
Note: Casters with brake typically go at the REAR of the unit.
1. After removing crate above shipping pallet, gently lay the unit onto its back.
Caution:
Use cardboard or other material to prevent scratching.
2. Install legs into undershelf gussets with feet to underside of shelf. Loosely tighten
set screws on undershelf.
3. Work legs into gussets on underside of unit and tighten set screw securely.
4. Adjust undershelf to desired height and tighten setscrews securely.
5. Insert caster stem into bottom of leg, and use a hammer or mallet to drive in.
6. Place table upright.
6
(continued on next page)
To be compliant with NSF
guidelines, set screws must be
filled with NSF-approved sealant.
set
screw
