EG10030 Rev 10/09
ASSEMBLY INSTRUCTIONS
High Density Floor-Trak
®
Single-Deep Skates
See page 2 for Double-Deep Skates. See page 3 for Track Systems.
PART # 351375
Assemble wire shelving unit. Bottom shelf must be mounted
on the third groove from bottom of posts. Remove leveling
bolt from bottom of each post.
To use donut bumpers, please note:
The position of bottom
shelf should accommodate donut bumpers. Place donut
bumpers so that they remain on top of skate.
1
Shelving Unit
Align skates (A) top holes with bottom of post. Use a
3
⁄
8
˝ flat
washer (B) with lock washer(C) and a
3
⁄
8
˝ -16 NC x 2˝ long bolt
(D) to screw through skate bottom into post plug. Use a flat
head screw driver to start assembly as shown in
figure 1
.
Repeat on opposite side. Tighten bolts with a ratchet, small
extension and
9
⁄
16
˝ socket as shown in
figure 2
.
2
Skate
Place mobile unit on track making certain the wheels fall within
the groove of the track. Make sure unit slides freely back and
forth on length of the track as shown in
figure 3
.
Note
: Shelving Unit Loading Instructions: Always position
heaviest items on lowest shelf. Distribute load evenly on each
shelf.
3
Mobile Units
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY
DAMAGE
.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE
FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Parts List
A. . . . . . . 2. . . . . skate
B. . . . . . . 4. . . . .
3
⁄
8
˝ flat washer
C. . . . . . . 4. . . . .
3
⁄
8
˝ lock washer
D
2
. . . . . . 4. . . . .
3
⁄
8
˝ slotted hex bolt x 2˝
item
qty
description
A
B
C
D
figure 1
figure 2
figure 3
CAUTION: will tilt if not loaded properly. Load bottom first!
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice/SpecFAB) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
NOTE: READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY.
