49
EN
13 Measurement/Check Data in the
Data Memory
Measured data as well as check data are stored automatically in the data
memory.
All stored data sets include date and time of the measurement or check.
The data memory can hold a total of 1024 data sets. Further measurements
will overwrite the oldest saved data sets.
13.1 Viewing Data
1. In the quick access area, activate
("Data" function).
The last data set will be displayed
2. Use the arrow keys to browse through the data sets in the data memory.
The index of the currently displayed data set is shown in the header.
Measurement data are shown with gray background, check data with
blue background.
3. Tap <Back> to return to the main screen.
13.2 Printing Data
You can send the measured data to a printer via Bluetooth. For details about
setting up a Bluetooth connection, see section 8.7.
Be sure to connect and switch on your printer.
Printing a single data set
1. In the quick access area, activate
("Data" function).
2. Use the arrow keys to select the data set to be printed.
3. Tap <Print>.
4. Tap <Back> to return to the main screen.
Printing all data sets
1. Tap <Menu> and select
Measurement Data > Print All
.
2. Tap <Yes> to confirm printing.
Tap <No> to abort printing.
3. Tap <Back> repeatedly to return to the main screen.
