Eagle Eye SG-Ultra Max Instruction Manual Download Page 29

Page: 29 / 73

8.7 Setting up Bluetooth Connections

Setting up the connection to a printer

Switch on the Bluetooth printer.

SG-Ultra Max

tap <Menu> and select

Setup

> Data Transfer

Configure

Printer

Tap <Edit> and select "Bluetooth Printer".

Tap <Back>.

Select "Configure Printer Target".

Tap <Start> to search for available Bluetooth devices.

Tap <Edit> and select the desired device.

Tap <Next> and then <OK> to save your selection.

Tap <Back> repeatedly to return to the main screen.

IMPORTANT:

You can only save one Bluetooth device. If you establish a

new Bluetooth connection as described above, the latest connection will be
deleted.

Setting up the connection to a PC

Switch on the PC and check whether it offers an integrated Bluetooth
interface.
If not, use an external Bluetooth adapter.

SG-Ultra Max

tap <Menu> and select

Setup > Data Transfer >

Configure

Export Target

Tap <Start> to search for available Bluetooth devices.

Tap <Edit> and select the desired device.

Tap <Next> and then <OK> to save your selection.

Tap <Back> repeatedly to return to the main screen.

IMPORTANT:

You can only save one Bluetooth device. If you establish a

new Bluetooth connection as described above, the latest connection will be
deleted.

Summary of Contents for SG-Ultra Max










































































Search results

Summary of Contents for SG-Ultra Max

Reviews:

Related manuals for SG-Ultra Max

Brands by name

Popular brands

Eagle Eye SG-Ultra Max, Instruction Manual

Search results

Summary of Contents for SG-Ultra Max

Reviews:

Related manuals for SG-Ultra Max

Brands by name

Popular brands