SG-100M Input Voltage Adjust
This guide will outline the steps necessary to change the input voltage between 115VAC or 230VAC. A
soldering kit and skills required for soldering will be required.
1.0 Disassembly
1. Disconnect the main power.
2. Open the SG-100M by removing the two screws on the bottom of the unit as shown in red.
3. Remove the Omega Panel Meter from the SG-100M housing as shown in red.
Eagle Eye Power Solutions, LLC
| Tel: 1-877-805-3377 | Fax: 1-414-962-3660 |
www.eepowersolutions.com
V1.0
