Eagle Access Control Systems Eagle I, Manual

Page: 2 / 19

Slide Gate Operators
I
Eagle I
The Fail Secure System
The Fail Secure System allows you to manually open the gate with a use of a crank in case of an
emergency. If a situation does arise, simply turn off the power switch and insert the crank at the
opening on the side of the operator. As you continually turn the crank the gate will open. DO NOT try to
crank the gate open when power is engaged.
Optional Release Procedure
Using the Eagle-2070-Fire Box
...,..,,..,
:,
..,
.. ;,7
..
,.,..,.
------,
..,
..,"!
..,
�"l""!l""'l".,.'1!!!'1,... ..
9"':', ').,.,.
') ") '),.
Pull Firmly On
The "T" Handle
To Release
The Chain
TURN THE POWER TO THE GATE OPERATOR OFF
AND UNLOCK THE FIRE BOX
*
- ·
..
*
Mounting The Secondary Entrapment
Note: Eagle Access Control Systems. Inc.
recommends the installation of Edge Sensors
on all sliding gate operator systems.
All Contact Sensors------\
Are Connected To
0
Edge Sensor Inputs
*
I
..
•
EDGE SENSORS
•
(TOP VIEW)
GATE OPENING
*
•
Eagle Operator
Edge Sensors should be
appropriately installed at
recommended locations to
ensure proper entrapment
protection against injury.
*
All Edge Sensors are shown
at recommended locations.
Eagle Access Control Systems, Inc.
I
(800) 708·8848 / www.eagleoperators.com
(18)