LVP603S User’s Manual
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
19
Item 21: “
Input_Width”
This item has four values for your choice, i.e.:
100%
,
1/2
，
1/3
and
1/4
.
100%
means that 100% images in horizontal direction are input;
1/N
(N=2, 3, 4) means only
1/N
images are input. If 3 sets of
LVP603S
are connected in parallel in horizontal direction, each set of
LVP603S
will capture 1/3 of input image. Press “
←
” or “
→
” key to select width of
input image, then press “
Enter
” to save the settings.
As shown in Figure 5, the width of input image for the 4 sets of
LVP603S
should be set as:
Input_Width
=
1 / 2
Item 22: “
Input_Height”
This item has four values for your choice, i.e.:
100%
,
1/2
,
1/3
and
9/16
.
100%
means that 100% images in vertical direction are input;
1/N
(N=2,3) means only
1/N
image are input. If 3 sets of
LVP603S
are
connected in parallel in horizontal direction, each set of
LVP603S
will
capture 1/3 of input image. When the hori-width and vert-height ratio of
the image signal source is 16:9, the black borders will appear in the
upper and lower part of the display, which can be adjusted by the items,
9/16 and NO.24 “Ver In Str”. Press “
←
” or “
→
” key to select height of
input image, then press “
Enter
” to save the settings.
As shown in Figure 5, the height of input image for the 4 sets of
LVP603S
should be set as:
Input_Height
=
1 / 2
Item 23: “
Hori_In_Str
”
It is used to set the horizontal start point of input image from which
LVP603S
will capture. As shown in Figure 5, the the horizontal start
point of the four sets of
LVP603S
are set as below respectively:
1#
LVP603S Hori_In_Str = 0
2#
LVP603S Hori_In_Str = 960
3#
LVP603S Hori_In_Str = 0
4#
LVP603S Hori_In_Str = 960
Item 24: “
Vert_In_Str
”
It is used to set the vertical start point of input image from which
