Eager Beaver 20 Ton XPT, Service Manual

Page: 10 / 59

Cam Shaft Determination & Ordering Worksheet
Step 1 Decide whether the cam is a LEFT or a RIGHT hand and whether it
is a SMALL (3 3/32”) or LARGE (4 º”) head.
Step 2 Measure the length of the cam. It is best to provide both the
dimensions “A”, the distance from head to snap ring groove, and
dimension “B”, the distance from the head to the end of the cam.
Step 3 Measure the diameter of the cam at both “C”, just behind the head,
and “D” just inside the spline.
Step 4 Finally, determine whether the cam is a 10 spline or 28 tooth spline.
Please fill in the chart below when ordering a cam shaft
HEAD STYLE
LEFT HAND SMALL
RIGHT HAND SMALL
LEFT HAND LARGE
RIGHT HAND LARGE
DIMENSION SPLINE
“ A“ 10
“B” 28
“C”
“D”
Fax the completed worksheet to Eager Beaver Trailers @ 856-423-0999.
Your Name: .
Your Voice Tel #: .
Page 8