PRODUCT MANUAL LC100
EAE KNX LINE COUPLER
LC100 R0
©
EAE Technology
www.eaetechnology.com
Page 16 / 17
7.2. Main Line
For Group Telegrams and Physical Telegrams the setting “transmit all” is intended only for testing
purposes. Please do not use for normal operation.
NOTE:
If the parameter “Send confirmation on own telegrams” is set to “yes”, the
LC100 systematically
sends an ACK on any own routed telegram. Since the repeater does not use a filter table, it is useful to
have an ACK sent along with routed telegrams.
Picture 2: Main Line Tab Parameters
ETS-Text
Range
[Default value]
Comment
Telegram routing
Group and Physical: route
configure
[Group and Physical: route]
route:
all telegrams are routed
configure:
The following parameters must
be set manually.
Physical telegrams
transmit all
block
[transmit all]
•
Physical telegrams are all routed.
•
Physical telegrams are all blocked.
Physical telegrams:
Repetition
if errors on main line
no
up to 3 repetitions
only one repetition
[only one repetition]
After main line transmission error (e.g. due to
missing receiver) Physical telegrams
•
are not repeated.
•
are repeated max. 3 times.
•
are repeated once.
Group telegrams:
Repetition
if errors on main line
no
up to 3 repetitions
only one repetition
[only one repetition]
After main line transmission error (e.g. due to
missing receiver) Group telegrams
•
are not repeated.
•
are repeated max. 3 times.
•
are repeated once.
Telegram confirmation
on main line
If routed
always
[always]
•
Routed telegrams to the subline are
confirmed by an ACK on the main line.
•
Each telegram on the mainline is confirmed
by an ACK.
Send confirmation on
own telegrams
yes
no
[yes]
•
Telegrams sent out to the mainline are
confirmed by added ACK.
•
No ACK confirmation.
Table 2: Main Line Tab Parameter Settings