HEADPHONE QUICK START
1. Make sure the Volume Controls are completely turned counter-clockwise before
you turn the Power on.
2. Connect the DC power cord to the back panel of the unit.
3. Turn on the Power switch.
4. Connect source input to unit (XLR, RCA, Aux, USB* and/or Bluetooth®)
To connect using Bluetooth® hold down the MODE button for approx.
5-secs until you can discover it in your Bluetooth® device.
Flashing Blue & Green LED:
indicate Bluetooth® is ready to be paired.
Flashing Blue LED only:
indicate Bluetooth® is connected.
5. Turn on your source signal(s) and adjust the volume on the source signal for
normal operation.
6. On the Input Select Knob, select location of audio source.
*When using USB Input, turn select knob to Bluetooth®.
Bluetooth® and USB source will not simultaneously play at the same time. If
both sources are sending signals, only Bluetooth® audio will take precedence.
7. Connect your headphone to Headphone Jack( ) in the front of the unit.
8. Adjust the Volume to a comfortable level and enjoy!
PRE-AMP QUICK START
1. Follow steps 1-6 on
Headphone Quick Start.
2. Using a 1/8” auxiliary cord, connect the audio output to the Pre-Amp Output jack
that is located on the back panel of the unit.
3. Adjust the Volume to a comfortable level and enjoy!
Power LED:
BLUE Indicates unit is ON
Output Controls
Headphone Knob- Controls the volume of the headphones.
Pre-Amp Knob- Control the Volume of the Pre-Amp output.
Input Select Knob- Controls which input you want to use for output.
Inputs
RCA Left/Right
XLR Left/RIght
Aux
Bluetooth
Outputs
Charge Only USB
Pre-Amp
Headphone
Bluetooth Controls
Next- Play next track.
Back- Play previous track.
Vol+ - Increase volume.
Vol- - Decrease volume.
Mode- Play/Pause and discover.
