EX4 Operation Manual
---33 ---
Track Mode (with the GPS successfully positioned)
In Position Mode, when Track Mode is activated, the aircraft will automatically follow user’s mobile
device.
(1) Please pay attention to the GPS signal status in Track Mode:
●
Track Mode can be used when the GPS signal is full on the APP;
●
Track Mode is not advised to be used when the GPS signal on the APP is
not full. If user need to use it, be sure to pay close attention to the aircraft
condition and the surrounding environment!
●
Track Mode must not be used when the GPS signal on the APP is poor!
(2) How to track
The aircraft will target the phone and always keep the default distance (5 meters) to track.
Warning: In order to ensure accurate return position, please choose a wide and open area (no large
buildings within 50 meters and no barriers within 10 meters) and ensure the GPS signal is
good so that the RTH function can work normally.
Ensure that the mobile phone is positioned successfully and accurately.
Waypoint Flying
Tap the map on the left corner on the APP main interface,it will pop up map / Waypoint Flying.
Ensure high battery level of the aircraft and the mobile phone before activating the Waypoint Flying
mode. Tap "Waypoint Flying" or "Flight Planning" after its takeoff and read through the notice. Tap
way-points on the screen and set the altitude (the defaultis 30 meters) on the right side of the
screen. Then tap "Start" to begin waypoint flying. user will see the aircraft fly towards the
pre-setpoints.
Tap "Stop" to exit Waypoint Flying mode. When the aircraft flies towards the final waypoint, it will
hover at that point.
Pic.
64
Pic.
65
Pic.
64
Pic.
66
Summary of Contents for EX4
Page 2: ......
