Eachine EX3 User Manual Download Page 34

● Safe flying

Please make sure you are in good shape mentally before every flight. Fly the aircraft as per your 

flying experience. Never fly under influence of alcohol or drugs. Keep the remote controller at least 

20 cm away from your body when flying the aircraft.

● Keep distance from a flying aircraft

Never use your hands to touch a flying aircraft under any circumstance. Don’t approach and touch a 

landed aircraft before its propellers are completely locked.

● Bear proper operation and safe flight gui

delines in mind

Please take a careful look at the manuals before flights for important information of product functions 

and operation tips, and learn how to use the accessory, safe flight always comes first. Stay informed 

of and abide strictly by relevant local laws and regu

lations. Keep away from any non-flight zones and 

respect other people's privacy.

● Practice flying together with skillful pilot

Beginners are suggested to practice flying together with skillful pilot’s guidance. Do not fly alone.

Important Statement

 This aircraft is not a toy, but hobby grade model. It should be assembled and operated properly. 

   Pilot must operate this aircraft in safe way. Improper operation may cause injury or property damage.

 This aircraft is applicable for pilots aged 14+ who are with skilled flying experience.

● Users are in full charge of proper operating this 

aircraft. Manufacturer and dealers disclaim any 

   responsibility for damages caused by misuse.

● Keep the small accessories away from kids to a

void accident.

Flight Safety Guidelines

Hobby grade radio control aircraft is somewhat considered to be the highest danger potential article. 

Users should firmly uphold the principle of “safety comes first”. Never fly the aircraft near airports, 

above crowds or in zones storing dangerous good

s and understand the responsibility of the accident 

may cause by improper operations.

● Stay away from obstacles, crowds, power lines, trees or waters

Always choose a wide open area for every flight, well away from people and property. Never fly 

directly over people or animals. Please don't fly in such bad weather conditions as high temperature, 

snow

, strong wind (≥level 5), rain or fog. Maintain 

a 7ft (2m) distance from the aircraft when taking off 

and landing.

● Keep the aircraft in dry environment

The aircraft is composed by sophisticated electronic components and mechanical parts. To avoid 

damages on the mechanical and electronic components, please keep the aircraft in dry environment 

and use clean cloth to wipe the surface and keep it clean.

-32-

EX3 User Manual

Summary of Contents for EX3





































Reviews: