
Use Hexagon wrench to remove the propeller, so that the propeller rotation smoothly,
pay attention to a with A, B with B, to ensure that the two propeller balance, installation
of the new propeller should not be too tight
When changing the steering gear, pay attention to the direction of connecting Rod.
When changing other internal parts, pay attention to the installation order and position
When removing and replacing the tail rotor, please
pay attention to the direction, align the motor shaft
and press it slowly to ensure smooth rotation.
Parts replacement instructions
When replacing the tail rod, first disassemble the housing,
then remove the tail motor plug,
Pull out backwards and pay attention to the direction of installation
After installing the tail Rod,
fix the machine shell screw
When fixing the screw, please
note that the direction of the tail
skid should be vertical and not
deflected
Introduction of the corresponding socket of receiver
Gyro calibration method
1. When flying yaw, first land and calibrate the gyroscope.
2. When calibrating the gyroscope, the aircraft must be
placed on a level ground.
3. The indicator light will flash quickly during the calibration process,
the indicator light stops flashing to take off.
LED
LED
Optical flow localization
The tail motor
Main motor
Before and after the steering gear
Aileron steering gear right
Aileron steering gear left
Gyroscope
Warning
Maintain a flying altitude above one meter
Trimming Notes