EA3GCY ILER-DDS Assembly Manual Download | Manualshive

Page: 25 / 26

background image

ILER-DDS V2.1 VFO/DDS.

Page 25

LIMITED WARRANTY

Please read carefully PRIOR to do any work with your kit.

All parts provided with this kit are guaranteed against any fabrication defect for one year after the sale.
The buyer has the option to examine the kit and the instruction manual for 10 days. If during this period
he or she decided not to build the kit, it will be possible to send the kit back, with all shipping charges
payed by the customer. The seller shipping charges and all other costs involved (Ebay or Paypal
charges) will not be reimbursed.
If you plan to ship it back, PLEASE CONSULT how to do it to

[email protected]

Javier Solans, ea3gcy, guarantees that when the kit is built and adjusted following the information
enclosed in this manual, and it is used according to the advices mentioned, it will work according to its
specifications.
It is your duty to follow the advices and recommendations of this manual, correctly identify the parts, use
good working procedures and have access and correctly use the tools and instruments requirede for the
assembly and adjustment of the kit.

In case you think any part for the kit is missing, please make an inventory of all parts with the parts list
included on  the  manual.  Please  revise  all  bags,  envelopes  or  boxes  carefully.  If  something  is  missing,
please send me an email and I will mail you the part right away. Even if you don't want to bother with a
common  part  you may  have  on  your junk-box  or  a  local  store,  please  let  me know  so  I  can  help  other
customers with a similar problem.
I can also provide a part that you have broken, dammaged or lost by accident.
In  case  you  find  any  errata  or  mistake  on  this  manual,  or  you  like  to  make  a  comment,  please  get  in
touch with me at

[email protected]

Enjoy building QRP!
73 Javier Solans, ea3gcy

«
...
23
24
25
26
»

Summary of Contents for ILER-DDS



























Reviews:

No comments

Related manuals for ILER-DDS

Brand: Laser Pages: 9

Brand: R&S Pages: 81

Brand: Alto Pages: 6

ProEnergyBox 4060P

Brand: EFOY Pages: 40

Brand: Lafayette Pages: 7

Brand: Rohde & Schwarz Pages: 299

Brand: AWA Pages: 23

Brand: Philips Pages: 1

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 4

Brand: Philips Pages: 1

Brand: Philips Pages: 1

Brand: Philips Pages: 1

Brand: Philips Pages: 30

Brand: Philips Pages: 30

Brand: Philips Pages: 38

Brand: Philips Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands