ENGLISH 2
ENGLISH 3
Slide open battery compartment cover [C2]
Insert 2 x AAA batteries observing polarity * “+” and“ –“ marks+
Replace battery compartment cover
Put the probe outside to sense the outdoor temperature
Use a pin to press the RESET [B5] button on the rear of the unit, the unit is now ready
for use
The unit can be placed onto any flat surface (C3), or wall mounted by the hanging
hole (C1) at the back of the unit.
4.
Temperature
4.1
Temperature
After start-up, the unit would display Indoor & Outdoor Temperature, and Past 24
Hours Maximum and Minimum Indoor & Outdoor Temperature Record.
Press “°C /°F” button (B1) to select Temperature in Celsius mode or Fahrenheit mode.
If the temperature is out of the measurable range, LL.L (beyond the minimum
temperature) or HH.H (beyond the maximum temperature) will be shown on the LCD.
4.2
Temperature Alert function:
Press “ALERT” button to select to activate the alert function, and corresponding alert
icon (
or
or ) would be displayed on LCD, sequence as follow,
Activate Upper Limit of Outdoor Temperature Alert function
Activate Lower Limit of Outdoor Temperature Alert function
Activate Upper & Lower Limit of Outdoor Temperature Alert function
Deactivate Alert function for Outdoor Temperature
Hold “ALERT” button for 3 seconds to enter outdoor upper temperature alert setting.
Icon “ ” beside Temperature’s digits flash. Press “
▲
” or “
▼
“ button to adjust
setting for alert value, Press “ALERT“ button (B4) to confirm the setting, and move to
the lower limit temperature alert setting. Press “
▲
” (B2) or “
▼
“ (B3) button to
adjust the alert value, press “ALERT” button to confirm and quit the setting.
When it’s alert, the corresponding icon “ ” or “
” would flash on the LCD. Press
any buttons to stop the alert sound
,
otherwise, it will sound for 2 minutes, and stop
automatically.
Note: The Setting Mode will automatically exit in 15 seconds without any adjustment.
4.3
Frost Alert
“
”
is shown if the outdoor temperature is between -2
°
C ~ +3
°
C
5.
Precautions
Use a pin to press the reset button (B5) if the unit does not work properly.
Avoid placing the clock near interference sources/metal frames such as computer or
TV sets.
