_______________________________________________________________________________________________________________________________
European Safety Systems Ltd.
Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880
Document No. D234-00-201-IS_Issue_1 10-11-2022 Sheet 4 of 4
On -PB the plunger will remain in the down position until the
unit is reset. This is done by pulling the plunger back up to
the start position shown in fig 6. Then the plunger is twisted
back 90 degrees anti-clockwise to the stop.
On -PT the plunger will remain in the down position until the
unit is reset. This is done by lifting the plunger back up using
the tool reset key provided.
