E2S E2xC1X05R, Manual

Page: 1 / 11

European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880
Document No. D209-00-501-IS Issue 1 20-08-22 Sheet 1 of 6
INSTRUCTION MANUAL
E2xC1X05R & E2xC1X05F Combined Sounder & Beacon
For use in Hazardous Locations
E2XC1X05F E2XC1X05R
1) Product Table
Ensure the system power supply is capable of providing the maximum current required for all units. Review associated cable
size, length and quantity of units on each circuit.
2) Warnings

DO NOT OPEN WHEN AN EXPLOSIVE
ATMOSPHERE IS PRESENT

DO NOT OPEN WHEN ENERGISED

POTENTIAL ELECTROSTATIC CHARGING
HAZARD - CLEAN ONLY WITH A DAMP
CLOTH

HIGH VOLTAGE SHOCK HAZARD. WAIT 5
MINUTES AFTER REMOVING POWER
BEFORE OPENING THE ENCLOSURE
Avertissement:

NE PAS OUVRIR UN PRESENCE
D’ATMOSPHERE EXPLOSIVE

NE PAS OUVRIR ENERGIE

DANGER POTENTIEL CHARGE
ÉLECTROSTATIQUE - NETTOYER
UNIQUEMENT AVEC UN CHIFFON HUMIDE

HAUT TENSION, RISK DE CHOC.
ATTENDEZ 5 MINUTES APRES AVOIR
DEBRANCHE L’ALIMENTATION AVANT
D’OUVRIR LA BOITIER
3) Rating & Marking Information
3.1. ATEX / IECEx / UKEx certification
The E2xC1X05 combined alarm horn and xenon beacon
complies with the following standards:
Standards
EN IEC 60079-0:2018 / IEC60079-0:2017 (Ed 7):
Explosive Atmospheres - Equipment. General Requirements
EN IEC 60079-7:2015 +A1:2018 / IEC 60079-7:2018 (Ed. 5.1):
Explosive Atmospheres - Equipment Protection by Increased
Safety "e"
EN 60079-31:2014 / IEC 60079-31:2013 (Ed 2):
Explosive Atmospheres - Equipment Dust Ignition Protection
by Enclosure "t"
Ratings
E2XC1X05 :
Ex ec IIC T3 Gc Ta -20°C to +40°C
Ex ec IIC T2 Gc Ta -20°C to +55°C
Ex tc IIIC 85°C Dc Ta -20°C to +40°C
Ex tc IIIC 100°C Dc Ta -20°C to +55°C
Certificate No.
DEMKO 06ATEX 0421554X
IECEx ULD 14.0012X
UL21UKEX2135X
ATEX Mark, Equipment
Group and Category:
II 3G
II 3D
CE Marking
UKCA Marking
Model
Nom.
Voltage
Voltage Range
Sounder
Current
Beacon
Current
E2xC1X05FDC024
E2xC1X05RDC024
24Vdc 20-28Vdc 284mA 275mA
E2xC1X05FDC048
E2xC1X05RDC048
48Vdc 42-54Vdc 146mA 145mA
E2xC1X05FAC115
E2xC1X05RAC115
115-120Vac
50/60Hz
N/- 10% 104mA 80mA
E2xC1X05FAC230
E2xC1X05RAC230
220-230Vac
50/60Hz
N/- 10% 54mA 30mA
The current levels shown above are for the tone resulting in max. current draw (tone 1 - 340Hz Continuous)
Table 1: Electrical Ratings.