E2S DL105H AlertAlight, Instructions/Service Manual

Page: 3 / 12

E2S Warning Signals Impress House, Mansell Road, Acton, London W3 7QH sales@e2s.com e2s.com D218-00-351-IS Issue 1 10/05/2021
INSTRUCTION & SERVICE MANUAL
DL105H AlertAlight Combined Sounder LED Beacons
4x
1Nm
For DL105HAC units wire an Earth to the E terminal on the
PCBA in order to Earth the metal housing.
For DL105HDC units, using a ring terminal, fit an Earth to
the shown location underneath the M4 screw and M4
spring washer. This point shall not be used for any other
purpose (e.g. ground bonding).
Jumper Setting
Jumper
Link 4
Jumper
Link 5
Jumper
Link 6
24VDC Mode
(Default)
Open Closed Open
12VDC Mode
(Customer Set)
Closed Open Closed
Flash Mode
DIP switch
E - +
+ - E
D105HDC024 Beacon PCBA (24VDC Mode – Default Setting)
Flash Mode
DIP switch
E - +
D105HDC024 Beacon PCBA (12VDC Mode – Customer to Set)
+ - E
Jumper
Link 6
Open
Jumper Link
4 Open
Jumper
Link 5
Closed
Jumper Link
4 Closed
Jumper
Link 5
Open
Jumper
Link 6
Closed