E2S BExBTG05DPAC115, Instruction Manual

Page: 1 / 12

INSTRUCTION MANUAL
BExTBG05D-P
Xenon Flashtel
ATEx/IECEx & UKEx Gas & Dust
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880
Document No. D210-00-231-IS Issue 4 12-09-2022 Sheet 1 of 5
BExTBG05D-P
1. Product Table
Unit Type Code
Nominal
Input Voltage
Nominal
Input Current*
Max I/P Voltage
BExBTG05DPAC115 115Vac 140mA 126V
BExBTG05DPAC230 230Vac 55mA 253V
*The current levels shown above are for nominal input voltage
It is important that a suitable power supply is used to run the equipment. The power supply selected must have the necessary capacity
to provide the input current to all of the units.
The above table shows the input current taken by the various flashtels and shows the maximum voltage at which the flashtels can be
operated:
The input current will vary according to the voltage input level.
2. Warnings

DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT

DO NOT OPEN WHEN ENERGIZED

POTENTIAL ELECTROSTATIC CHARGING HAZARD – CLEAN ONLY WITH A DAMP CLOTH

COVER BOLTS CLASS A4-80

USE HEAT RESISTING CABLES AND CABLE GLANDS (RATED 110°C) AT AMB. TEMPERATURES OVER
40°C