e2-Live Home Automation
Edit by Amos /20150810
27
If TV is always ON, then RP-20 will send out the
aommand to turn off the TV
No detect：Don＇t care the status of appliances power ON or OFF, just perform the command of scenario.
Scenario Vaidation setting
After completed editting and storage of scenario, suggest to confirm the correctness and fluency of
perform of scenario, if there is any problem of action then you could easy adjust and fine tune on setting
page.
Please switch to the following page to perform : control verification
Æ
scenario verification
Scenario editing note:
RP-20 provides a
rich scenario editing functions let e2-Live scenarios easier to play with the
performance of the operation
Also need special attention to several important functions when editing a scenario, in order to
ensure actually perform the operation of scenarios.
1.
RP-20 porovide 7 zones of IR individual emission, with
2 to 6 points of wiring type IR, please
make sure the wire is connected to correspondent device for correct remote control.
2.
RP-20 provides intelligent power sockets combined with iPower, in scenario editing, there are 7
appliances can detect the actual status of power on / off, if used with iPower, in order to better ensure
the accuracy of the scenario action, please make clarify the initial conditions of power ON/OFF
3.
RP-20 provide IR with the insert interval function, Lighting and curtain control doesn’t have such
Press the button of just edited and
storaged. RP-20 will execute the function
of scenario, please pay more attention in
it should be complete execution
