INSTALL THE DUCTWORK
(DUCTED HOODS ONLY)
1.
To reduce the risk of fire, use
only
metal
ductwork .
2
Decide where the ductwork will run
between the hood and the outside.
3
.
A straight, short duct run will allow the
hood to perform most efficiently.
4
.
Long duct runs, elbows, and transitions
will reduce the performance of the hood. Use as few of them as
possible. Larger ducting may be required for best performance with
longer duct runs.
5
.
The air must not be discharge into a flue that is used for exhausting
fumes from appliances burning gas or other fuels" "Regulations
concerning the discharge of air have to be fulfilled.
6
.
Install wall cap. Connect round metal ductwork to cap and work back
towards hood location. Use duct tape to seal the joints between
1.TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.
2.GROUNDING INSTRUCTIONS
Summary of Contents for UG15-76A
Page 1: ...RANGE HOOD INSTRUCTION MANUAL ...
Page 2: ......
