4
Software Settings
1. There is an HTML management system built into every EZ2 unit
which is accessed thru a standard web browser. The unit can communi-
cate thru the CAT5 ethernet cable connection or thru the wireless con-
nection, so you can manage remote units from a single location.
2.
IP ADDRESS:
Default IP address for the EZ2 is 192.168.1.1. To ac-
cess the EZ2 your computer IP address must be on the same subnet ie;
192.168.1.xxx.
TECH TIP
: Download the EZ2 Discovery Tool from
http://www.e-
zy.net/support/2plus/Utility/
. This tool will assist you in finding the
EZ2 on the network and allow you to change the EZ2 IP address or set
it as a DHCP client. Just select the unit, click on IP DETAILS, make
selections and save changes directly to the device.
3.
SECURITY:
The following security changes are recommended :
a.
PASSWORD:
Change the user name and password on the
EZ2 by going to SYSTEM | PASSWORDS and setting the first
user name and password.
The default is no user name or pass-
word for ease of system setup
b.
ENCRYPTION:
Set an encryption type and key. We recom-
mend WPA2 because it is most secure, but if this install is as a
client the encryption type and key must match the Access
Point.
6.
SITE SURVEY:
The site survey is a very useful tool to determine
what wireless devices are within range of your
EZ2 and could be a
source of interference that could cause degraded performance. Go to
WIRELESS and then click on SITE SURVEY then REFRESH. The list
will show all wireless devices including channel #, MAC Address and
relative signal strength of all the devices within the range of the EZ2
7.
FACTORY DEFAULTS
: If at any time the system stops working be-
cause of changes made to the settings, you can get back to the original
settings by resetting to factory defaults. Go to ADMIN | SAVE/RELOAD
SETTINGS, then Reset Settings To Default. Any customized settings
will be lost once this process is initiated.
8.
UPGRADE FIRMWARE
: For the latest firmware point your browser
at
http://www.e-zy.net/support/2plus/Firmware/
. Download the latest
firmware to your PC. Select UPGRADE from the menu and then browse
