W
hat
’
s
i
n
t
he
B
ox
h
oW
t
o
s
et
U
p
f
irst
t
iMe
t
op
a
ttaChMent
h
oW
t
o
t
ake
d
oWn
• 1 10’ x 10’ Frame Fully Assembled
• 1 600 Denier Commercial Top Upgrade
• 4 Piece Standard Stake Set
• 1 Roller Bag
Please read each step before you attempt to set up. Save these
instructions for future reference. Once top is attached to frame,
set up and take down are easily accomplished within seconds.
Repeat Step 1 in First Time Top Attachment.
1.
Place your E-Z UP
®
frame in the center of area to be shaded.
With partner on opposite side, grasp two outer legs, slightly lift off
ground and step backwards, stopping at full arms’ length.
1.
With partner on opposite side
of shelter, stand diagonally facing one another. Grasp the top and
bottom of the diamond shaped area of trusses on opposite sides.
Lift up and step backwards until shelter is 3/4 opened, being care-
ful not to pinch fingers.
3.
Lift outer legs up and slide out the inner legs until the snap
button locks into the outer leg. Repeat on the opposite legs.
2.
To engage the Auto
Slider
®
at each corner, first
lift the fabric off of the slider,
then with one hand hold the
top of the leg while pushing
up on the slider with the other
hand. The pull pin will engage
the hole. Pull down the fabric
valance over the slider. Repeat
on all four corners.
1.
With partner, slightly lift
up two adjacent outer legs,
depress snap button and tele-
scope inner legs into outer
legs. Repeat on the opposite
legs.
2
.
Release pull pin at each
corner by first lifting valance
fabric away from slider. With
one hand push up on truss
near the pull pin, pull the pin
out to release.
Note:
It is much
easier to release pull pin when
the shelter weight has been
removed from the pull pin.
3.
Grasp the top and bot-
tom of diamond on diagonally
opposite sides. Lift the shelter
up slightly and shake it while
stepping towards your partner
until the shelter is 3/4 closed.
With each partner grasping
two outer legs, push frame
together to fully close it.
Be careful not to pinch fingers.
4.
Place roller bag over the
shelter.
2.
Gently unfold the fabric top and place it over the open frame.
3.
Attach the top to the frame by
matching the quick attachment strips
on the top with the strips on the
frame. Push firmly together at each
corner.
Pull Pin
