TRIM-LINE Boltless Shelving
Assembly Instructions
Place post flat on the ground so that Post Connector
slots are on the inside and the seam is on the outside.
Post Connectors are adjustable as illustrated on the
back page of the assembly instructions and are
required for end frame assembly.
Starting from the bottom tap in one side of the Post
Connector and LOCK IMMEDIATELY. Then tap in and
lock the other side. The post will have to be spread
lightly as you work your way up the post. Use a 1/4" or
a 3/8" screwdriver or chainsaw wrench to lock
connectors. Assembly time is approximately 1 to 2
minutes per 84" (2134mm) frame.
Load
Capacities
Maximum Evenly Distributed Static Load
Per Pair of Connectors
36"
0.91m
39 1/2"
1.00m
48"
1.22m
60"
1.52m
66"
1.68m
72"
1.83m
4 Shelf Clips
& one Metal
20ga. Shelf
350 lb
159 kg
290 lb
132 kg
200 lb
91 kg
- -
- -
- -
- -
- -
- -
TFC
390 lb
177 kg
350 lb
159 kg
290 lb
132 kg
191 lb
87 kg
- -
- -
- -
- -
TBC
600 lb
272 kg
550 lb
249 kg
500 lb
227 kg
- -
- -
- -
- -
- -
- -
TWB
700 lb
318 kg
675 lb
306 kg
650 lb
295 kg
550 lb
249 kg
450 lb
204 kg
375 lb
170 kg
TWB with one
Combination
Tie Bar
975 lb
442 kg
950 lb
431 kg
925 lb
420 kg
900 lb
408 kg
800 lb
363 kg
700 lb
318 kg
Please note load capacities & components subject to change without notice.
SAFE WORKING LOADS OF UP TO 7,000 LBS (3,175 kgs) PER PAIR
OF POSTS OR BAY OF SHELVING.
SAFETY FACTOR OF 1.66 TO 1.00 BASED ON MINIMUM YIELD
STATIC LOADING ONLY.
PLEASE CONTACT THE FACTORY FOR CAPACITIES NOT SHOWN
IN CHART.
E-Z-RECT MANUFACTURING LTD.
Head Office: North Vancouver, P: 604 929 5461 Eastern Sales: Mississauga, P: 905 564 0890 UK Sales: Oxon, P: 01993 779494
Email:
Web:
www.ezrect.ca
Email:
Web:
www.ezrect.ca
Email:
Web:
www.ezrshelving.com
E-Z-Rect Manufacturing Ltd. TL Revised October 2019
POST CONNECTORS
Use to join posts (refer to chart for quantity).
Available depths: 12" (0.30m), 15" (0.38m),
18" (0.46m), 24" (0.61m),
30" (0.76m), 36" (0.91m).
COMBINATION TIE BARS
Use with TWB connectors.
Available depths: 18" (0.46m), 24" (0.61m),
30" (0.76m), 36" (0.91m).
Allow TCTB hook to snap into connector
slot with its own spring.
TFCV FRAME CONNECTOR
Use with particleboard shelves.
Available lengths: 36" (0.91m),
39 1/2" (1.00m), 48" (1.22m).
ONLY FOUR BASIC COMPONENTS
1. Post 3. Frame Connector.
2. Post Connector 4. Shelf (metal or particle board)
TRB GARMENT ROD SUPPORT
Use to support 1" O.D. galvanized garment hang rod.
Available depths: 12" (0.30m), 15" (0.38m),
18" (0.46m), 24" (0.61m),
30" (0.76m), 36" (0.91m).
FRAME
CONNECTOR
SHELF
PLASTIC CAP
POST
CONNECTOR
HEIGHT
3' TO 20'
WIDTH
2' TO 6'
DEPTH
1' TO 3'
F R A M E A S S E M B L Y
S T E P O N E
S T E P T W O
POST
POST
CONNECTOR
LOCK
FIRST
LOCK
THIRD
LOCK
FIFTH
LOCK
SIXTH
LOCK
FOURTH
LOCK
SECOND
SAFETY
TWIST LOCK
SCREWDRIVER OR
CHAINSAW WRENCH
C AUTION
–
P O S T C O N N E C T O R M U S T B E L O C K E D F O R S AF E T Y
POST
BLACK PLASTIC CAP
BLACK PLASTIC
FLOOR PROTECTOR
SHELF CLIPS
4 Required per shelf level
(2 Right Hand & 2 Left Hand)
Used for metal shelves.
CONNECTOR LOCKING CLIP
Simply snap in connector
locking clip where/when
required to lock connector.
TFCL FRAME CONNECTOR
Use with metal shelves.
Available lengths: 36" (0.91m),
39 1/2" (1.00m), 48" (1.22m).
TBC FRAME CONNECTOR
Use with metal or particleboard shelves.
Available lengths: 36" (0.91m),
39 1/2" (1.00m), 48" (1.22m).
TWB FRAME CONNECTOR
Use with metal or particleboard shelves
and as a kickplate.
Available lengths: 36" (0.91m),
39 1/2" (1.00m), 48" (1.22m),
60" (1.52m), 66" (1.68m), 72" (1.83m).
BLACK PLASTIC ZINC PLATED ZINC PLATED
STACKABLE SHIM FLOOR PROTECTOR SHIM
WARNING:
PLEASE FOLLOW ASSEMBLY INSTRUCTIONS. DO NOT USE SHELVES OR CONNECTORS WITH COMPONENTS OTHER THAN E-Z-RECT PRODUCTS.
NOT LOCKED LOCKED TAB FULLY LOCKED
SH E L F P L AC EM E NT
–
L A Y T H E S H E L F O N T O P O F F R A M E C O N N E C T O R
ON TOP PLACED CORRECT INCORRECT
