Revised: 7/22/2015
1 of 8
By: HA
Assembly Instructions for Mobile Aisle Mechanical Assist
Mobile Base Assembly:
1.
Assemble the mobile aisle rectangular base with the Mobile End Wheels (MEW) front drive
and install the drive shafts as per the Mobile Base Assembly drawing shown in
Figure 1
below.
2.
Place the mobile base on the mobile track. Assemble shelving on the mobile base, as outlined
in the shelving assembly instructions, which are included in the Post Connector Package.
Figure 1: Mobile Base Assembly
Mechanical Assist Assembly
:
1. Remove the tower cover from the
Mechanical Assist
that houses the chain, sprocket and
crank blocks.
Note:
The hub and steering wheel assembly are installed last.
2. Attach the
Mechanical Assist
to the mobile base
MEW
front drive
sprocket on the
outside. Remove the two 5/16” locking nuts and washers from each side of the sprocket, as
shown in
Figure 2
. Place the Mechanical Assist with the slots at the bottom over the 5/16”
