Table of contents
Preamble
Precautions
Your 512EVO charger
In the showroom
In the workshop
Updates
Optimus
Accessories and spare parts
Technical specifications
Warranty
E-XTEQ
512EVO V1
/ Ref. MAN_512EVO_V1_RNT_EN_V1.0
6/34
It is strongly recommended to hang the safety strap to a fixed
support in your facility (hook or other), so as to avoid dropping the
device, which could lead to irreparable damage to the device itself
or damage to an object that it falls onto (bodywork for example).
It may also be fixed using a padlock in order to prevent theft.
Below the dimensions to install the adapter plate:
Connect the power cable to connector CEI22 situated on the back
of the device, then connect the other end to a standard electric
socket. Connect the clip cables (on the front of the device) to the
appropriate connector.
Once installed, the charge cable can be fixed with a hook
(provided with the charger) to securely prevent cable from being
accidentally removed.
INSTALLATION ////////
Switch on the device by setting the switch to position “I”.
The device starts up by displaying its software version, its serial
number and the date and time successively.
When ready, the device can be connected via the camps to a
battery. The “standby” mode is shown by a flashing battery icon,
situated at the top left of the main screen.
SWITCHING ON ////////
Status LEDs:
Charging
Charge status
Alarm