e-way E-2540, Manual

Page: 30 / 148

Soft re-set
Many errors can be fixed by performing a soft re-set. This is done by pressing
the power button for approximately 10 seconds. This will lead the scooter to
go back to factory settings. This applies to both CR and SN errors as well as
other errors. If none of the above error solutions has worked, a soft re-set
should be performed before calling customer service.
Other solutions and tips and tricks
At www.wilfa.com/eway, you will find tips and tricks to solve potential errors as
well as videos showing many basic repairs and maintainance solutions.