04/2017 E-Twow
®
User Manual Page 7 / 20
Operating Instructions
1. ON/OFF
Press the switch for 3 seconds, and the display will light up, indicating
the power is on. Press for 3 seconds if you want to turn it off. It will
turn off automatically if you don
’
t use it for 3 minutes.
2. Speed control
Press the right thumb accelerator to control the speed (1-23 mph).
3. Braking control
Press the left thumb and the electronic magnetic brake will be
activated. The greater pressure you put the greater breaking force
will be. Pull the lever for rear drum brake activation. Fender friction
brake can also be used.
4. Horn
When the power is on pressing the horn button will cause it to sound.
5. Led headlight
In manual mode: Press the On/Off Light button when needed and
there will be a sign on the display, indicating the lights a r e on.
Press the button again when you do not need the light and they will
turn off. Keep the light button pressed for a few seconds and it will
go to “Auto” mode. In “Auto” mode the sensor that the Uscooter is
equipped with will turn the light on automatically (auto light mode) if
the sensor detects poor ambient light until the sign
“
A
uto” disappears
from the screen. For example: when it is cloudy and the
“Auto”
light
mode is on, the lights will turn on. If amount of light returns to normal
daylight, the auto light mode detects the light and the Headlights will
go off after 5 seconds. On auto light mode, the display is also lighted
depending on the ambient light. If the scooter is on auto light mode,
you can go to manual mode by pushing the On/Off Light Button.
6. Mileage show
When the display is powered on, it shows two modes: ODO and trip.
You can change it by pressing the settings button. In
“
T
rip”
mode,
press the setting button (S) for 3 seconds and it will clear the trip.
7. Emergency
In an emergency, it
’
s recommended to use the foot brake.
