ELECTRIC TWO WHEELS
A NEW ERA IN URBAN MOBILITY
ENGLISH
13
[LIGHT] L1-L2-L3-L4-L5
- To set up and save the speed limit you want, press the S - [SET] button
-
To finish the settings, release thumb brake and
turn on the scooter
Menu for settings
a.
To set up one of this options, please follow the
steps detailed below:
- Turn on the display
- Press and hold the thumb brake. Keep it pressed
during the entire operation
- Press the [POWER] button
The display will show: P1
b. Move to the option you want by pressing
the [LIGHT] button: P1- P2*- P3**
- To set up and save the option you want, press the S - [SET] button
-
To finish the settings, release the thumb brake.
* – If you want to stop the scooter while this function is activated, please use
the thumb electric brake.
** – This function eliminates the speed limitation at 30 km / h, providing a
higher engine speed and torque. Note: To avoid any dangerous situation, we
recommend using this function ONLY to ramp up. This function is available only
on the Booster model.“
ERROR CODE
E1 – Overcurrent protection (Motor does not move for more than 4 seconds) -
this error clears after release the acceleration throttle is released.
E2 – Communication error (No communication for more than 400 ms) - this
error clears when starting the communication.
E3 – Overvoltage error (Battery voltage higher) – this error clears if you put back
the original battery.
P1 = Zero Start [ON/OFF]
P2* = Cruise Control [ON/OFF]
P3** = Sport function
