e-TWOW S2 BOOSTER E, User Manual

Page: 12 / 128

11
EN
6. FOLDING, UNFOLDING AND ADJUSTING THE HANDLEBAR HEIGHT
(a) (b (c)
Folding steps
• To fold the scooter start by adjusting the handlebar’s height to the minimum.
Do this by opening the lock lever as shown in figures (a) and (b).
• Next, press down on the display as shown in figure (d), while also pushing
the height button, as shown in figure (c), to lower the handlebar’s height. Push the
lock lever back into lock position.
• Next, press the folding buttons while also while pulling sideways the handle -
bar grips as shown in figure (e) and then fold them downwards.
• Next, press the folding lever in the direction of the arrows, while slightly push -
ing the handlebar forward, as shown in figures (f) and (g)
• Continue folding the scooter until the folding hook enters the opening located
on the rear brake, as shown in figure (h).
(d) (e) (f)