ELECTRIC TWO WHEELS
A NEW ERA IN URBAN MOBILITY
10
Menu for speed limit
a.
To set up
a
speed limit,
please follow the steps
detailed below:
- Turn off the display
- Press and hold the thumb brake.
Keep it pressed
during the entire operation
- Power the display
The display will show “L1”
b.
Move to the option you want by
pressing the [LIGHT] button:
[LIGHT] L1-L2-L3-L4-L5
- To set up and save the speed limit
you want, press the S - [SET] button
-
To finish the settings, release thumb
brake
and turn on the scooter
Menu for settings
a.
To set up one of this
options, please follow the steps
detailed below:
- Turn on
the
display
- Press and hold
the thumb brake. Keep it pressed
during the entire operation
- Press the [POWER]
button
The display will show: P1
b.
Move to the option you want by
pressing the [LIGHT] button:
P1- P2*- P3**
- To set up and save the option you
want, press the S - [SET] button
-
To finish the settings, release
the
thumb brake.
* – If you want to stop the scooter while this function is activated, please use the
thumb electric brake.
** – Turns off the acceleration so that both handles become regenerative brake
handles
When this option is activated, the scooter can be used as a normal kick scooter,
but with 2 regenerative brakes.
ERROR CODE
E1 – Overcurrent protection (Motor does not move
for
more than 4 seconds) - this error clears after release the
acceleration throttle
is released
.
E2 – Communication error (No communication for
L1 = Limit the speed to 6 km/h
L2 = Limit the speed to 12 km/h
L3 = Limit the speed to 20 km/h
L4 = Limit the speed to 25 km/h
L5 = Limit the speed to 30 km/h
P1 = Zero Start [ON/OFF]
P2* = Cruise Control [ON/OFF]
P3** =
Zero acceleration
[ON/OFF]
