Page 10 of 16
HOW AND WHEN TO CHANGE SPEED
ECO has a 6-speed (derailleur) system. Rider changes speed only by turning speed rig on the left hand side of
handlebar.
Road condition
Proper speed
Flat
5 or 6
Gentle slope
3 or 4
Steep or hilly slope
1 or 2
！
CAUTION
1.
To prevent the chain falling off, do NOT pedal backward while changing speed
2.
To prevent the parts damage, do not turning speed grip as the bike stop.
3.
To prevent the parts damage, change the gear gradually.
4.
For long-term storage, engage speed at 6 for releasing mechanical tension.
CHARGING
ECO can be charged in two ways.
(1) Directly charging: Remain battery pack on bicycle and connecting with charger. Plug charger into
power outlet on wall.
(2)
Charging separately from bicycle: take away the battery from bicycle and charging wherever power is
available.
INSTRUCTIONS FOR CHARGING
Directly charging:
(1) Turn the key switch to
“LOCK” position.
(2)
Connect charger cable to the battery pack and then plug into power outlet.
(3)
Turn on the switch of charger.
(4)
During charging process, green light goes flashing continuously until battery is fully charged after 4 ~ 5
hours.
Green light illuminates steadily represents charging process has been accomplished.
2. Charging Separately from Bicycle:
(1) Loose the seat quick-release and pull up the seat posts slightly.
(2) Turn the key switch to
“OPEN＂position and
take out the battery pack
.
(3)
Lay down the battery pack and connect the charging wire.
(4)
Put the battery pack back to bicycle and turn the key switch to“LOCK＂position.
(5)
Lock the seat quick-release firmly after adjusting the seat posts.
2
Copyright ©2008-2009 ETON America, all rights reserved.
