e-TINT, LLC | WWW.E-TINTPRODUCTS.COM | (877) 451-5937
MADE IN THE U.S.A.
All e-Tint
®
products are warranted to the original purchaser for six (6) months from the date of purchase against manufacturing
defects in materials and workmanship. Upon receiving returned product(s) that e-Tint determines to be defective, we will repair
or replace the product at our option. Please contact Customer Support at [email protected] for warranty service.
This warranty does not affect the legal rights of customers under applicable state or national laws governing the sales of
consumer goods.
EXCLUSIONS
The Return Policy and Limited Warranty does not apply to: (a) normal wear and tear, including scratched lenses; (b) water
damage; (c) damage due to neglect, abuse, misuse, or mishandling; (d) damage caused by improper storage or improper
maintenance; (e) damage caused by use of chemicals or improper cleaning; (f) damage due to accidents or acts of nature; and
(g) battery damage from improper use; (h) damage resulting from alterations, changes, or repairs not authorized in writing by
e-Tint.
Online Auction Purchases: Products purchased through online auctions (other than our primary websites or Authorized
Dealers) are not eligible for warranty coverage. Online auction confirmations are not accepted for warranty verification.
EXCEPT AS SET FORTH IN THE LIMITED WARRANTY, ALL E-TINT
®
PRODUCTS ARE PROVIDED ON AN “AS IS” BASIS. TO THE
EXTENT PERMITTED BY APPLICABLE LAW, ALL OTHER WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, ARE
EXPRESSLY DISCLAIMED.
LIMITED WARRANTY
This product is subject to one or more U.S. or foreign patents listed at: e-tintproducts.com/intellectual property
RETURN POLICY
For warranty/repair service, or to return any new, unopened product for a full refund or exchange (within 30 days of purchase),
please contact Customer Support at [email protected] or visit www.e-tintproducts.com for a Return Merchandise Autho-
rization (RMA) number and specific shipping instructions. Products returned for a full refund must be in new condition and in original
packaging (including all accessories), and returned to us within 30 calendar days of the issuance of the RMA. A 20% restocking fee
may be charged for any accessories or components missing from the returned product. A purchase receipt MUST be provided with
the return of any product. Products returned without an RMA will not be eligible for a refund or exchange. The shipping and duty
charges for returning a product are the customer’s responsibility.
The following information is required for all returns:
•
LOT NO.
Found on the UPC label (on the retail box)
•
SKU NO.
Found on the UPC label (on the retail box)
•
ORIGINAL PURCHASE RECEIPT
•
FIRST & LAST NAME
•
TELEPHONE NUMBER
•
EMAIL & SHIPPING ADDRESS
®
4
1-3
5
6
7
8
®
9
visit www.e-tintproducts.com for instructional videos
1.
Switch the spectacle into the “off” or clear state.
2.
Hold the eyewear frame while removing the nose piece and avoid pressing the inner liquid crystal surface of the lens. Grip the bottom
corner of the nose piece and gently rotate outward about 1/4 inch to release from the lens
(Diagram 1 - see opposite page).
3.
Repeat process on the opposite side of the nose piece and pull to completely remove
(Diagram 2 - see opposite page).
4.
Open left Temple Door, located to the right of the arm hinge
(Diagram 4).
5.
Open right Temple Door, located to the left of the arm hinge
(Diagram 5).
6.
Gently slide the center Lens Lock out from the eyewear frame about 1/4 of an inch
(Diagram 6).
7.
Grip the lens (avoid pressing the inner liquid crystal surface of the lens) and gently pull out until it separates from the frame
(Diagram 7).
8.
Gently slide the lens out of each corner of the frame
(Diagram 8).
9.
Choose a new lens (either an e-Tint
®
lens or clear lens). If installing an e-Tint
®
lens, be sure to first insert the end with the electronic plug
(left corner) into the open temple cavity
(Diagram 9). Do not close Temple Door until the lens is entirely reinstalled.
10.
Gently slide the opposite corner of the lens into the open temple cavity until is snaps securely into place.
11.
Align and press the lens back into the main brow of the eyewear frame.
12.
Push the center Lens Lock back into the eyewear frame until it snaps securely into place.
13.
Close Temple Doors.
14.
Reinstall the nose piece by sliding it up into the lens until is snaps securely into place.
lens removal / installation
