background image

13

USB MENU 

• 

Gives access to the 3 file types:

• 

 File generated automatically when a screed 

drying sequence is launched. It contains the follow-

ing data : Date-Time; supply T° ; preset T°

• 

 File(s) used to record the Drying sequences

• 

 File used to record all the error-related information

• 

Touching any of the icons opens the screen shown 

below.

• 

Touching the 

 allows to access advanced func-

tions through the use of a code (only for 

). Refer 

to  

“Advanced functions” on page 14

 DRYING/SEQUENCE/LOGGING RECORDS

• 

Allows to scroll through the existing files, identified by 

their name, their date of creation and size. Number of 

files is max. 150, for all file types, except SEQ, limited to 4.

• 

Each file can be saved on a USB stick using the 

 

icon

• 

All the files can be saved on a USB stick using the 

ALL

 icon

DATE AND TIME SETTING 

• 

Set the date using the up and down arrows

• 

Set the time using the up and down arrows

Validate by touching 

 to save the changes.

STATISTICS 

• 

Indicates the total running time (top right corner) of the 

appliance

• 

Indicates, for each heating element, the total heating 

time and % of used time compare to the total lifetime 

of the component. Clicking on it allow to reset the sta-

tistics.

The heating elements are represented as if the 

operator is facing the control panel.

Reset all the statistics using 

ALL

 

.

EN

User’s Guide

Summary of Contents for M 36 Flex













































Reviews: