SHANGHAI ESURVEY GNSS CO., LTD.
28
The compensator is on
The compensator normally remains switched on.
1. Press
→
R/L
to enter configuration mode:
2. Press
0SET
to turn to the following page:
3. To switch off the compensator, press
R/L
to change the value to
OFF
.
4. Press
for confirmation.
Others
Contact us.
6.8
The Horizontal Tangent Screw is Broken
The horizontal tangent screw needs to be replaced.
Disassemble the Horizontal Tangent Screw
6.9
The Vertical Tangent Screw is Broken
The vertical tangent screw needs to be replaced.
Disassemble the Vertical Tangent Screw
6.10 Display Error
The LCD is yellow, the screen is blurred, or there is no display.
The cable for the buzzer connector is loose
Connect the cable again:
