e-survey E600H, User Manual, Page: 18 / 34

SHANGHAI ESURVEY GNSS CO., LTD.
12
3.7 Device Configuration
In Device Configuration page, you can do the following:

Set time zone.

Select whether to enable direct link mode, and IMU sensor data output.

Set 7-pin serial port baud rate.

Select whether to enable speaker (smart voice broadcast).

Select whether to enable base alert.

Select the storage directory (internal storage or SD card).

Select whether to enable device debug.

Select whether the power is on automatically when 5-pin cable is connected.

Select whether the power is off automatically when 5-pin cable is disconnected.

Select whether to enable network.

Select whether to enable WIFI hotspot share network: with a SIM card inserted and
it enabled, the device connected to the hotspot of the receiver (PC, smart phone or
tablet) can surf the internet by using SIM data.

Set naming method of static files.

Select whether to enable base transmission site info.