e-survey E200 User Manual Download Page 3

 

 

 

SHANGHAI ESURVEY GNSS CO., LTD. 

 

 

Copyright © Shanghai eSurvey GNSS Co., Ltd. 2021. All rights reserved.

 

No part of this document may be reproduced or transmitted in any form or by any means 
without prior written consent of Shanghai eSurvey GNSS Co., Ltd. 

Trademarks and Permissions

 

 and other eSurvey trademarks are trademarks of Shanghai eSurvey 

GNSS Co., Ltd. 

All other trademarks and trade names mentioned in this document are the property of their 
respective holders. 

Notice

 

The purchased products, services and features are stipulated by the contract made 
between eSurvey and the customer. All or part of the products, services and features 
described in this document may not be within the purchase scope or the usage scope. 

The information in this document is subject to change without notice. Every effort has been 
made in the preparation of this document to ensure accuracy of the contents, but all 
statements, information, and recommendations in this document do not constitute a 
warranty of any kind, express or implied. 

Certificate

 

 

The device complies with part 15 of the FCC rules. Operation is subject to the following 
conditions: 

  This device may not cause harmful interference. 

  This device must accept any interference received, including interference that may 

cause undesired operation. 

Contains FCC IDs: 2ABNA-2455A, XMR201903EG25G 

Contains IC IDs: 11648A-2455A, 10224A-201903EG25G 

 

This product has been tested and found to comply with European Council Directive 
2014/53/EU, thereby satisfying the requirements for CE Marking and sale within the 
European Economic Area (EEA). Contains a radio module. These requirements are 
designed to provide reasonable protection against harmful interference when the device is 
operated in a residential or commercial environment.

Summary of Contents for E200



































Reviews: