Quick start
The 2B unit is an advanced multiple program E-Stim unit designed to be used by
beginners and advanced users alike. It has advanced safety features as well as an
extensive control system and easy to use controls. We strongly recommend you read
the manual from cover to cover, but we have a quick start guide to help you with your
first explorations.
Once you have fitted the battery (page 8), find the on-off slide switch and turn the unit
on. Make sure you have nothing else attached to the unit.
The LCD should light up, and text appears. If the LCD illuminates, but no text appears
then you many need to adjust the contrast.(page 11). Once your 2B has started up you
should see a display similar to
P u l s e
5 0 : 5 0
A : O F F L B : O F F
This shows the unit is in Pulse mode, with both outputs set to OFF, output power is set to
low, and the pulse rate and pulse feel are both set to 50. If you see something different
it may be because your 2B has 'remembered' previous settings. To get a 2B back to
'normal' settings you may need to perform a Factory Reset (Page 15).
With no cables or electrodes connected, turn the knob marked ‘Channel A level’ (the
knob on the left) clockwise. You should notice the blue channel A LED (top right), start
to flash and the display changes to
P u l s e
5 0 : 5 0
A : 3 3 % L B : O F F
The actual value shown is dependent on how much you
turn the Channel A knob. Now adjust the knob marked
‘Channel B level’ (the knob on the right) clockwise. You
should now notice the channel B led (bottom right), start to
flash and the display changes to
P u l s e
5 0 : 5 0
A : 3 3 % L B : 2 7 %
You have now successfully adjusted the channels output level. Again the actual value
is dependent on how much you turn the Channel knob.
Now turn the Adjust knob (the centre knob) and you will notice the value on the top
line of the screen change, as well as the rate the LEDs are flashing.
P u l s e
3 0 : 5 0
A : 3 3 % L B : 2 7 %
Now press and hold the select button, and at the same time turn the Adjust knob (the
centre knob) and you will notice the second value on the top line of the screen
change, this is the pulse feel setting.
P u l s e
3 0 : 6 3
A : 3 3 % L
B : 2 7 %
Not all modes use both the options to change adjustments, it will depend on the mode
selected. If the ‘:’ is not displayed, then the adjust option is not available.
Both channels can be controlled
independently.
Turn the knob clock wise to
increase the value, anti-clockwise
to decrease the value. If you want
to control both channels together,
then switch the Join Mode on (See
Page 11)
6
