E sky KING 3, Instruction Manual

Page: 8 / 47

DC12V Power 12V
If the red POWER light does not turn steady when the charger connected with the DC 12V power
supply, it indicates improper connection exists or the power supply does not work well. Please
check and reconnect until it works properly.
Power Charger
If the red POWER light and the green Charge indicator flash at the same time when the battery
connected with the charger, it indicates the battery may be defective. Please check the battery
and ensure it is in good condition.
Keep it in a cool, dry and ventilated place while charging. Keep it far away from heat and
inflammables.
ESKY
Please use original ESKY charging equipments for charging and flying in case of unexpected
damage or injury.
It needs great care while charging. Never leave it unattended in the process of charging.
Please disconnect the power supply immediately and move to safe place in case you find
something abnormal.
However it is normal for the charger and battery to get warm while charging.
Charger Power
DC 12V 3 5
If the red POWER light flashes while the green CHARGER light is not on when the battery connected
with the power supply, it indicates the battery is in state of Protection. Please disconnect the DC 12V
power supply and reconnect it 3-5 seconds later.
Charger
4.15V
The green Charge indicator will turn steady once the battery is fully charged.Please take off the
battery from charger. It will discharge automatically if not disconnected in time and re-charge as
the single cell voltage is less than 4.15V until fully charged. The process repeats if not disconnected.
Please take off the battery from the helicopter before charging. NEVER charge the battery while
connected with the helicopter.
Do NOT charge on a carpet, cluttered workbench, paper, plastic, vinyl, leather, wood, and the like.