manualshive.com logo in svg

E-ride Industries 2009 EXV2, Owner'S Manual

Introducing the E-ride Industries 2009 EXV2 - the ultimate electric vehicle of its time. Navigate through the intricacies of this cutting-edge ride with our detailed Owner's Manual available for free download at manualshive.com. Discover an in-depth guide to unleash the full potential of this remarkable product!

Share
Download
background image

 

 

e-ride Industries 

 

Page 44  

 

Make sure the pins on the plug of the extension cord are the same number, size, and 
shape as the AC plug of the battery charger. The use of an improper extension cord could 
result in the risk of fire or electrical shock.  Place all cords so they will not be stepped on, 
tripped over or otherwise subjected to damage or stress. 
 

5.3.5  Charger Safety Information 

 

This manual contains important safety and operating information for your 

charger.  Please read all of the safety information before using the charger.  Some 
important safety information and warnings are given below: 

 

a.

 

To reduce the risk of injury, charge only liquid electrolyte (wet) lead acid 
rechargeable batteries.  Other types of batteries may burst causing personal injury 
and damage. 

Summary of Contents for 2009 EXV2











































































































Reviews:

No comments

Related manuals for 2009 EXV2

Brands by name

Popular brands

Load more brands