Version 1.0
(right).
•
Move the body weight of backward braking, to reduce the effect of inertia.
•
Keep your brakes in good condition and adjust / Export adjusted brakes if necessary. If the brake
pads are worn out,
replace the brake pads in good time or deliver your bikes for repair.
•
Before riding, always check the brakes.
•
Remember that the braking distance can be extended considerably in slippery conditions.
•
More information about the brakes, if necessary, get a bike shop or manufacturer.
5.9 Button and Display
①
Headlight Button
②
Bell
③
Shifter
④
LCD Display
⑤
Throttle
5.10 Operating Instruction
①
Headlight Button
②
Bell
③
Brake lever
④
Display, long press “M” button open.
⑤
Throttle, rotating it and the e-bike will forward.
6. Maintenance and repairs
IMPORTANT!
•
Do not attempt to open the battery casing, motor or control unit. Failure to do so may result in
personal injury and void the warranty. In case of difficulty, please contact us.
•
Make sure that the tire surface is tightened.
•
Your bike is equipped with derailleur which tightens the chain automatically. If the chain starts to
slacken continuously and jumping of front chainring, you can easily tighten the chain, loosen first
the rear axle nuts slightly, and then tighten the bolts. Make sure that the chain is rotating freely
and tighten the rear axle nuts back on. Take the bike for service if you do not know what should
do.
8
