Version 1.1
pressure.
Verify the pressure in both tires.
Perform a full battery charge and test again
Power switched on; the bike does not work
The control unit or the motor might need to be
replaced
Power switched on; the bike works only with throttle
The controller, the motor or pedal sensor might
need to be replaced
Throttle unresponsive
View battery charge level and recharge fully if
necessary
The control unit or the motor might need to be
replaced
The bike goes away by itself
Check that the throttle is not jammed. Lubricate
or replace the throttle grip
The bike does not start after stop
Check that the brake lever is released
completely
The charger is connected, the signal light does not
turn on
Make sure that the AC outlet is powered
correctly
The charger connected to the battery but the battery
is not charging
Check that the battery is not fully charged
already
Check that the charger is properly connected
7.1 Technical Specifications
Model
CINB2201
Type
Pedelec
Weight
24.3 kg
Permissible Gross Weight
Maximum 75 kg
Dimensions (W D H) mm
× ×
1770 640 1010
×
×
Maximum Speed
32 km/h (Limited)
Maximum Mileage
38-47 km
Control Unit
3 step, LED
Battery
36V, Li-ion,10Ah
Chargers
100V~240V/42V*2A
Charging time
3~4 hours
Brakes
Disc Brake
Motor
36V 350W, starting at about 32 km/h the motor
×
power supply is interrupted
Pedal sensor
Speed sensor
8. Assembly guide
8.1 Take out the bike from the original packaging
①
Remove all the parts from the original packaging. Check if the parts are damaged before assembly.
②
The seatpost, saddle and handlebars are tied to the Ebike, and the front wheel is tied to the front fork legs.
(Use scissors to cut the cable tie for assembling use) In addition, there are pedals, charger, charger cable
and assembly tools in the cardboard box.
8
