14
Terminator
The purpose is for compensating signal attenuation in long distance
connection at RS-485/RS-422 I/O. If the switch 1 & 2 are set in “ON” position,
the signal compensation will be activated. To disable the function, just push
switch 1 & 2 to opposite position.
LED Indicators
LAN (Green)
Network signal indicator (When the LAN signal is detected, the LED will be
on.)
WLAN (Green)
Wireless Lan indicator ( When wireless Lan signal is connected, the LED will
be on )
TX / RX (Green)
Data sent indicator (When data are sent out to the network, the LED will be
on.)
Data received indicator (When data are received from the network, the LED
will be on.)
SYS (Red)
Power indicator (When the power is on, the LED will blink once per second.)
