![background image](http://html1.mh-extra.com/html/e-mu/proteusx/proteusx_operation-manual_3118433068.webp)
5 - Preset Editor
Key Window Page
68
Proteus X Operation Manual
Assign the Realtime Controller
f
Tip:
Random Cross-
Switch can be used in
combination with
Velocity Switching to play
random voices when you
play softly and a known
voice when you play
hard.
4.
Select the first voice by clicking anywhere on the strip. A red box forms around the
voice to show that it’s selected.
5.
Hold the
Ctrl
key and select the next voice by clicking on it. Both voices should be
surrounded by red boxes.
6.
With both voices selected, select
Open Voices
(Crtl+Enter) from the Preset menu.
The Voice Editor screen appears. Verify that the two voices are selected in the “Voice
Selector” section of the window.
7.
Assign
Crossfade Random
as modulation source in the Cords section.
8.
Select
Amp Crossfade
as the destination. Set the
Cord Amount
to +127.
9.
Voices 1 and 2 will now be randomly selected whenever you press a key.
Continuous Controller Window Buttons
The CC Windows (1-5) offer additional voice switching and crossfading possibilities
using MIDI Continuous Controller messages. Unlike the Realtime window, the
CC
crossfades and cross-switches occur only at Note-on time.
They cannot be continu-
ously swept during the note. These controls are designed to be used to switch and fade
voices during your performance. You can use the CC windows to switch between drum
sets, or bring in accent samples.
The CC assignments are easy to use because you can complete the entire patch from this
window. The list of control sources is accessed by clicking on the button
to the right
of the Assignment screen. The following control sources are available: Mod Wheel,
Pressure, Pedal, MIDI A-P, Footswitch 1 & 2, Flip-Flop Footswitch 1 & 2, Thumbswitch
and Flip-Flop Thumbswitch.
To Cross-switch Two Voices:
1.
In order to cross-switch voices, they must first be assigned to the same key range. In
the Key Window, set the high and low key range of the voices so that they
completely overlap.
2.
Set up a basic cross-switch in one of the CC Windows as shown above. For this
example, we’ll use two voices. This will cause voice 1 to sound whenever the CC
value is in the range of 0-63 and voice 2 to sound whenever the CC value is in the
range of 64-127.
List of Control Sources
Summary of Contents for ProteusX
Page 1: ...E MU Systems 1 Desktop Sound Module Desktop Sound Module Operation Manual Operation Manual...
Page 10: ...10 Proteus X Operation Manual...
Page 54: ...4 Multisetup Global Controls Working with Multisetups 54 Proteus X Operation Manual...
Page 134: ...7 Effects Effects Descriptions 134 Proteus X Operation Manual...