![background image](http://html1.mh-extra.com/html/e-mu/proteusx/proteusx_operation-manual_3118433110.webp)
7 - Effects
Aux FX Screen
110
Proteus X Operation Manual
Aux FX Screen
All effects have a wet/dry mix parameter to control the ratio of effected-to-plain signal,
which is stored with the FX preset. The effect parameters vary with the type of effect.
Generally, when using the Aux Effects, the wet/dry mix in the effect should be set to
100% wet since the Aux Send amount controls how much effect will be applied.
Aux FX Send Amounts
The Aux Send Amounts can be controlled either from the Preset Cords or from within
each Voice. Refer to the FX Routing Diagram on
. Aux Effect parameters, such as
Delay Time, Feedback, etc., can not be externally controlled.
Effects List
Click on the Effects List icon
to show the list of effects.
Aux 1-3 Select
Select between Aux 1, Aux 2, or Aux3 FX in the TV view.
Output View
Selects the Main Output Window. See
. (Note: This button is disabled in “Single” mode.)
Wet/Dry Mix Control
Adjusts the ratio of effected signal to un-effected signal.
Effect Bypass
When this button is selected
(Red)
, the effect is completely
bypassed, allowing you to hear only the uneffected signal.
Effect Parameters
Each effect has its own set of user adjustable controls.
Aux1-3
Select
Wet/Dry Mix
Control
Effect
Parameters
Effects List
Aux Effects
Effect
Bypass
Output
View
Summary of Contents for ProteusX
Page 1: ...E MU Systems 1 Desktop Sound Module Desktop Sound Module Operation Manual Operation Manual...
Page 10: ...10 Proteus X Operation Manual...
Page 54: ...4 Multisetup Global Controls Working with Multisetups 54 Proteus X Operation Manual...
Page 134: ...7 Effects Effects Descriptions 134 Proteus X Operation Manual...