Tutorials
22
E-MU Systems
NOTE
Turning on the metronome
adds a 2-bar lead-in before
recording begins.
7.
Optional Step - Metronome:
To toggle the Metronome on and off, press
C
on
the computer keyboard. To adjust the metronome output level, press the
transport
Play
control, then select
Metronome Setup...
from the
Transport
menu. Use the volume slider to set the desired metronome level.
8. Press the
Go to Previous Marker / Zero
button.
9. Make sure the
Record Enable
button on the track is on (it should be on by
default).
10. Press the
Record
button on the Cubase transport control panel. The button
turns red and you’re recording.
11. When you’re finished recording your track, press the
Spacebar
, or press the
Stop
button on the Cubase Transport Control.
12. Press the
Go to Zero
button.
13. Press the
Spacebar
or press the
Play
button to play back your new Track.
Record Another Track
14. Press the
Go to Zero
button.
15. Drag the audio chunk you just recorded down below itself and release the
mouse button. A new track is automatically created with your recording. This
is a quick and easy way to set up a new track in Cubase. Now you’re all set to
record again on Track 1.
16. Press the
Record
button on the Cubase transport control panel and you’re
recording again. You’ll hear your first track playing along with you.
17.
Repeat steps 12-14
to record more audio tracks.
18. Press the
Mute
button
to silence any tracks you don’t want to hear.
Record Enable
Record
Play
Stop
Go to Start
D
r
ag
